TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual

 

45 

 

Figure 4-9 

¾  Use DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option.  If there is a 

DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related 

settings automatically from your DHCP server. 

¾  IP Address: This option allows you to input IP address from the print server. The IP address 

must meet the IP addressing requirements of the network segment. 

)

On the TCP/IP Setup screen, specify a fixed IP address is highly recommended. 

¾  Subnet Mask: This option allows you to input subnet mask from the print server. The IP 

address must meet the IP addressing requirements of the network segment. 

¾  Default Gateway: This option allows you to input gateway from the print server. This IP 

address of gateway must meet the router or gateway to go across of the network segment. 

¾  Rendezvous Settings: Enable/Disable the Rendezvous(Bonjour) support for Apple Mac OS 

X 10.2 or higher.