TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual
Product codes
TL-PS110P
TL-PS110P
Single Parallel Port Fast Ethernet Print Server
1
Chapter 1. Introduction
1.1 Product Overview
The external print servers enhance capability by letting you place your printers at convenient
locations directly on the Ethernet network, and by increasing network printer performance and
management. Please note that the print server does not support printing with host-based printers,
e.g. CAPT, GDI, PPA.
1.2 Components and Features
Dongle-sized Wireless Print Server
¾ 1 Parallel port
¾ Fast Ethernet network port: RJ-45 for 10Base-T or 100Base-TX
¾ 1 Setup CD contains driver and manual for Windows system
¾ One external AC power adapter
¾ Built-in Reset Button
¾ One Quick Installation Guide
1.3 LED Indicators
LED
Status
Indication
Status Blinking
(Orange)
When power switched on, the Status indicator will flash five
times, and then on.
100Mbps On (Green)
LAN Port has a valid network connection at 100Mbps.
10Mbps
On (Orange)
LAN Port has a valid network connection at 10Mbps.
)
Note:
The Status LED should be flash five times when POST. If not, please contact your local dealer for
repair or replacement.
repair or replacement.
1.4 Factory Defaults
¾ Username:
admin
¾ IP
Address:
192.168.0.10
¾ Subnet Mask: 255.255.255.0
)
Note:
The TL-PS110P is produced without password by default.