Fujitsu PRIMERGY RX100 S5 CFY:RX100S5-006IN Data Sheet

Hard disk architecture

3.5” SATA 

3.5” SAS/SATA

Mainboard type

D 2542

Chipset

Intel

®

 3210

Processor quantity and type

1 x Intel

®

 Celeron

®

 processor / Intel

®

 Pentium

®

 Dual-Core processor / Intel

®

 XEON

®

 processor 3000 sequence

Intel

®

 Celeron

®

 440 (1C, 2.00 GHz, SLC: 512 KB, 800 MHz, 35 W)

Intel

®

 Core™2 Duo E7200 (2C, 2.53 GHz, SLC: 3 MB, 1066 MHz, 65 W)

Intel

®

 Pentium

®

 E2200 (2C, 2.20 GHz, SLC: 1 MB, 800 MHz, 65 W)

Intel

®

 Xeon

®

 E3110 (2C, 3.00 GHz, SLC: 6 MB, 1333 MHz, 65 W)

Intel

®

 Xeon

®

 E3120 (2C, 3.16 GHz, SLC: 6 MB, 1333 MHz, 65 W)

Intel

®

 Xeon

®

 L3110 (2C, 3.00 GHz, SLC: 6 MB, 1333 MHz, 45 W)

Intel

®

 Xeon

®

 X3220 (4C, 2.40 GHz, SLC: 2x4 MB, 1066 MHz, 95 W)

Intel

®

 Xeon

®

 X3320 (4C, 2.50 GHz, SLC: 2x6 MB, 1333 MHz, 95 W)

Intel

®

 Xeon

®

 X3360 (4C, 2.83 GHz, SLC: 2x6 MB, 1333 MHz, 95 W)

Intel

®

 Xeon

®

 X3370 (4C, 3.00 GHz, SLC: 2x6 MB, 1333 MHz, 95 W)

Memory slots

4 (2 banks with 2 DIMMs each)

Memory slot type

DIMM (DDR2)

Memory capacity (min. - max.)

1 GB - 8 GB

Memory Protection

Advanced ECC

Memory notes

Dual channel support. For dual channel performance, a minimum of 2 memory modules have to be ordered. 

Capacity per channel has to be the same.

2 GB (1 module(s) with 2 GB), DDR2, 800 MHz

1 GB (1 module(s) with 1 GB), DDR2, 800 MHz

Upgrade notes

For a memory and processor upgrade a BIOS update may be required.

USB ports

5  x (2x front, 2x back, 1x internal)

Graphics (15-pin)

1  x VGA (15-pin)

Serial 1 (9-pin)

1  x serial RS-232-C (9-pin),  usable for iRMC or system or shared

Mouse / Keyboard (PS/2)

2

LAN / Ethernet (RJ-45)

2 x Gbit/s Ethernet

Service LAN (RJ45)

1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s) 

Service LAN traffic can be switched to shared onbord Gbit LAN port

SATA Controller type notes

SATA (for 1x CD-RW / DVD / DVD-RW)

LAN Controller

BCM 5715, 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration), PXE-Boot via LAN from PXE server, iSCSI 

Boot (also diskless) via onboard LAN

Remote Management Controller

Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 

2.0 compatible

Integrated RAID Controller

2 port SATA with RAID 0/1for HDD´s

4 port for internal SAS HDDs, with RAID 0/1 for 

Windows and Linux

SATA Controller

2-port SATA 300 with RAID 0, 1

SATA Controller type notes

for easy change SATA hard disks (hot-plug opt.)

PCI-Express x8

2 x low profile (one of these can be used as standard short, 175mm)

Accessible drive bays

1 x 5.25/0.5-inch for CD-RW/DVD

1 x 3.5/0.5-inch for ServerView Local Service Panel

Hard disk bays

2 x 3.5-inch easy change SATA

2 x 3.5-inch hot-plug SAS/SATA

Optional hard disk bays

2 x 3.5-inch hot-plug SATA 

-

Operating buttons

On/off switch

NMI button

Status LEDs

System status (amber / yellow)

Identification (blue)

Hard disks access (green)

Power (amber / green)

At system rear side:

System status (amber / yellow)

Identification (blue)

LAN connection (green)

LAN speed (green / yellow)

Service display

Optional:

ServerView Local Service Panel (LSP)