Avers Stratus 27/20 MW Matt White W-E-ST-02720-MW User Manual

Projection screen AVERS can be operated manually or automatically (screens with built-in remote control system). Both 

operation methods can be used simultaneously if optional dedicated wall switch is installed.  

Manual screen operation is possible with the wall control switch or by radio frequency transmitter of the optional remote 

control system.

- Push button „€ ”, the screen will begin to roll down and stop automatically at the bottom position after rolling down.

   - Push “Stop” button  of the remote transmitter, screen rolling operation will be stopped.

- Push button „

”, the screen will begin to roll up and stop automatically in the upper position after rolling up.

Pojection screen Avers do not require periodical service maintenance. Clean dust from the screen case and fabrics with 

dry soft cloths.  If needed use moisturized cloth with soft detergent to remove stains. After stain removal dry the cleaned 
surface with cloth carefully.

1) Avers screens warranty period is 24 months from the date of purchase confirmed with the original purchase invoice.
2) Extended warranty period for electric engine is 60 month.
3) Surety commits to fix free of charge any failures (component or production defects) of the product  which appear during 
    warranty period.
4) Warranty exclusions :
    a) the failures caused by the usage of the screen against the rules described in operation manual,
    b) the failures caused by improper storage or transportation,
    c) mechanical defects of the screen other than mentioned at point 3),
    d) damages caused with overvoltage at power network,
    e) deinstallation and reinstallation of the screen.
5) Avers Screens Service department will remove all defects within 21 days after receiving the demaged product.
6) Warranty claims should be passed to the screen supplier (dealer).  

At other cases please contact service.

The screen fabrics does not 
roll down/up automatically

Projector power cord plug is not connected 
to the trigger transmitter outlet.

Connect projector power cord plug to the 
trigger transmitter outlet

Symptoms

The screen fabrics does not 
roll down

Reasons

Power failure/ Battery uncharged

Remedy

Check the screen’s circuit fuse and the 
power cable/ Recharge battery

The screen fabrics does not 
roll down smoothly

The screen stops in the 
middle position.

The screen was not installed properly in 
horizontal position.

There are some objects on the bottom bar 
way.

Power failure

Check if the screen case is properly leveled. 
Reinstall the screen correctly.

Remove the objects which can block the 
proper work of the screen or are at the 
bottom bar way.

Check the propriety of electric installation 
and the state of the power wires.