Jeti 8-channel receiver 2.4 GHz FHSS with Connector system JR 80001212 User Manual
Product codes
80001212
computer radio control system
EN
6
Receiver Menu
6.1 Overview of Receiver Data Items
The introductory display shows the type of receiver. By pushing of
key R (arrow down) more detailed data of receiver
and transmitter can be cued.
key R (arrow down) more detailed data of receiver
and transmitter can be cued.
Pairing- by pushing the key U (arrow up) pairing of the receiver
with the transmitter will be executed. Pairing of the
receiver should only be carried out when the JETIBOX is directly
connected to the receiver.
with the transmitter will be executed. Pairing of the
receiver should only be carried out when the JETIBOX is directly
connected to the receiver.
RX/TX- Item RX shows the unic production number of the receiver.
Item TX shows the unic production number of the
transmitter, to which the receiver has eventually been paired.
Item TX shows the unic production number of the
transmitter, to which the receiver has eventually been paired.
Rx Diag- Item A1 or A2 shows which antenna the receiver is using at
present. Item Kx informs about the number of
transferred channels (this number depends of the transmitter
abilities).
By means of key D (arrow down) you arrive at the line of basic
mode selections, where you may select read out of
measured values (Measure) or setup of the receiver (Main setting,
Channel set, Out Pin Set, Auto Set).
present. Item Kx informs about the number of
transferred channels (this number depends of the transmitter
abilities).
By means of key D (arrow down) you arrive at the line of basic
mode selections, where you may select read out of
measured values (Measure) or setup of the receiver (Main setting,
Channel set, Out Pin Set, Auto Set).