Jeti Hendheld RC 2.4 GHz No. of channels: 8 80001585 User Manual
Product codes
80001585
computer radio control system
EN
4.
When you press the “F4 (Curve)” button
you go directly to curve function menu
screen.
screen.
5.
From the curve type options select
the“x>0” type. Adjust the curve, if
necessary, so that the middle point is at the
50% output point (in the middle).
necessary, so that the middle point is at the
50% output point (in the middle).
a.
Flight mode setting configuration
b.
Curve type icon
c.
Switch assignment for the spoiler mix function
d.
Delay for the mix function deployment or retraction
One of the most commonly used mixes for sailplanes, this mix
function will allow you to mix rudder function with your ailerons to
help your model have more coordinated turns. You can use one of
the free mixers to set up this mixing function.
function will allow you to mix rudder function with your ailerons to
help your model have more coordinated turns. You can use one of
the free mixers to set up this mixing function.
12.7 Ailerons to Rudder Mix
1.
From inside the „Fine Tuning, >Free
mixes“ menu, press the „F2 (Add)“ button
to create a new mix.
to create a new mix.
2.
In the „From“ menu line, select the
“Ailerons” input function as the master
function and in the „To“ line select the
“Rudder” for your slave function. The
“Master Value” represents the percentage
of elevator travel as it relates to the spoiler
travel. Press “F5 (Next)” to save the mix.
function and in the „To“ line select the
“Rudder” for your slave function. The
“Master Value” represents the percentage
of elevator travel as it relates to the spoiler
travel. Press “F5 (Next)” to save the mix.
3.
To edit the mix simply highlight the mix
and press the “F4 (Edit)” button to go into
the selected mix’s advanced menu.
the selected mix’s advanced menu.
5.
5.
a
b
c
d
148