Jeti Hendheld RC 2.4 GHz No. of channels: 8 80001585 User Manual
Product codes
80001585
computer radio control system
EN
f)
Free Mix Multiple Servo Settings
If the mix uses more than one output function as the slave, then the
“Output Mix” menu will appear. This menu allows you to edit the
settings for the individual slave servos (S1-S4).
“Output Mix” menu will appear. This menu allows you to edit the
settings for the individual slave servos (S1-S4).
g)
Free Mix Directional Positive/Negative Movements
Once the free mix function is created you can edit the advanced
settings menu so that the mix will either add to or reduce a slave
function‘s movement. To do this, you can set the mix value as a
positive percentage or a negative percentage.
settings menu so that the mix will either add to or reduce a slave
function‘s movement. To do this, you can set the mix value as a
positive percentage or a negative percentage.
h)
Using Another Free Mix to control a Free Mix
A free mix can be controlled by just a control input function (Master)
or it can also be controlled by another free mix’s control function
(Slave). Here is how to create a free mix whose input is controlled by
an existing free mixer output:
or it can also be controlled by another free mix’s control function
(Slave). Here is how to create a free mix whose input is controlled by
an existing free mixer output:
•
To allow a free mix to control another free mix you must enable
the “Slave Link” option. This allows the free mix to act as input for
other free mixes. Use the “3D button” to highlight and select this
option. You will see a check mark if the option is enabled and an X if it
is disabled. You will also use the (+) or (-) to determine the mix
direction.
other free mixes. Use the “3D button” to highlight and select this
option. You will see a check mark if the option is enabled and an X if it
is disabled. You will also use the (+) or (-) to determine the mix
direction.
•
To allow a free mix to be controlled by another mix you must
enable the “Master Link” option. This allows the free mix to accept
the input from other free mixes. Use the “3D button” to highlight
and select this option. You will see a check mark if the option is
enabled and an X if it is disabled. You will also use the (+) or (-) to
determine the mix direction.
the input from other free mixes. Use the “3D button” to highlight
and select this option. You will see a check mark if the option is
enabled and an X if it is disabled. You will also use the (+) or (-) to
determine the mix direction.
4.
4.
i)
Free Mix Trim Settings
This item allows you to enable or disable whether trim functions will
influence the free mix or not.
influence the free mix or not.
j)
Free Mix Control by Dual Rates
With this item you can activate or deactivate the “Slave Dual-Rate”
function for the free mix. This settings allows the slave output to be
affected by dual rate inputs. All adjustments can be visually
inspected right away in the servo monitor page by pressing the “F2
(Servo)” button. Pressing the “F5 (Ok)” button returns you back to
free mix screen.
function for the free mix. This settings allows the slave output to be
affected by dual rate inputs. All adjustments can be visually
inspected right away in the servo monitor page by pressing the “F2
(Servo)” button. Pressing the “F5 (Ok)” button returns you back to
free mix screen.
k)
Aileron Differential
This option is displayed only after you create a mix from any function
to Ailerons. When this option is activated, the output of the mix will
be influenced by the aileron differential settings. If this option is
deactivated, the output of the mix is transmitted directly to the servo
without any modifications. Uncheck this option if you want to use
aileron differential fine tuning without affecting throws of the mixes
applied on ailerons.
to Ailerons. When this option is activated, the output of the mix will
be influenced by the aileron differential settings. If this option is
deactivated, the output of the mix is transmitted directly to the servo
without any modifications. Uncheck this option if you want to use
aileron differential fine tuning without affecting throws of the mixes
applied on ailerons.
3.
Deleting a Free Mix
Press the “F3 (Del)” button to delete the highlighted free mix.
4.
Configuration & Setting
A free mix programming screen can be accessed by highlighting the
selected mix and then pressing the “F4 (Edit)” button.
selected mix and then pressing the “F4 (Edit)” button.
96