Buffalo LinkStation 441D 12TB LS441D1204-EU Data Sheet
Product codes
LS441D1204-EU
36
Changing from JBOD to RAID 1
Hard drives that aren't in a RAID array will have the status "Normal". You must have at least two drives that are not in
a RAID array to build a new RAID 1 array with RMM. Building the RAID 1 array will save the data on one of the drives
and overwrite the data on the other drive. You will be able to choose which drive's data to keep.
a RAID array to build a new RAID 1 array with RMM. Building the RAID 1 array will save the data on one of the drives
and overwrite the data on the other drive. You will be able to choose which drive's data to keep.
1
In Advanced Settings, click Drives.
2
Click
to the right of "RAID".
3
Choose a RAID array.
4
Set the RAID mode to "RAID 1".
5
Check "Add a disk to RAID array with RMM. Your data will be preserved.".
6
Select the drive whose data will be saved from the drop-down menu.
7
Select the drive to add to the RAID array.
8
Click Create RAID Array.
9
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.