Buffalo LinkStation 441D 12TB LS441D1204-EU Data Sheet
Product codes
LS441D1204-EU
42
2
Click Drives to format an internal drive or USB Drives to format an external drive.
3
Select the drive to format, then click Format Disk.
Note: If you connect an external drive to the LinkStation and the drive status is still shown as "Unformatted",
refresh the status by clicking Rediscover Disk. If the status doesn't change, disconnect and reconnect the USB
drive.
refresh the status by clicking Rediscover Disk. If the status doesn't change, disconnect and reconnect the USB
drive.
4
Select a format type and click Format.
5
The "Confirm Operation" screen will open. Enter the confirmation number and click OK.
6
Depending on the size of your drive, the format may take several minutes to several hours to complete. The
power LED will flash during the format. Shared folders cannot be accessed during a format. Do not turn off the
power LED will flash during the format. Shared folders cannot be accessed during a format. Do not turn off the