Buffalo LinkStation 441D 12TB LS441D1204-EU Data Sheet

45

Click 

 to the right of "Groups".

Select the group whose space will be limited.

Enable quotas, choose the maximum space the group is allowed, and click OK.

Click OK.

In Advanced Settings, click 

 to the right of "Users".

Select the user who will inherit the group quota settings.

Change the user's primary group to the group with the quota, then click OK.

Click OK.

Click the 

 icon and select Restart to apply the quota settings.

If a drive fails, NAS Navigator2 and Settings will show an error message.

Notes: 
•  Do not replace a running drive while the LinkStation is turned on. Power down the LinkStation before 

changing the drive. While the LinkStation is running, never unplug or remove drives without dismounting 
them first.

•  The replacement drive should be a OP-HD/LS series drive, available from Buffalo. Using a different drive might 

cause your LinkStation to malfunction.

•  Use a Buffalo OP-HD/LS series drive of the same size or larger for the replacement drive. If a larger drive is 

used, the extra space will not be usable in a mirrored RAID array.

•  To avoid damaging the LinkStation with static electricity, ground yourself by touching something made of 

metal before handling any sensitive electronic parts.

•  After a drive is replaced, it will take about 30 minutes before normal file reading and writing are restored. 

Settings may not be accessible during this period.

•  Do not change the order of the hard drives in the LinkStation. For example, pulling out drive 1 and replacing 

it with drive 2 may cause data to be corrupted or lost.

•  If a new drive is not recognized after installing it, click Rediscover Disk in Settings.