Buffalo LinkStation 441D 12TB LS441D1204-EU Data Sheet
Product codes
LS441D1204-EU
6
Chapter 1 Getting Started
Diagrams
LS441D/LS441DE
1
Status LEDs
Normally, these LEDs blink green when hard drives are accessed. If a drive fails, its LED will turn red.
Normally, these LEDs blink green when hard drives are accessed. If a drive fails, its LED will turn red.
2
Power LED
The white power LED will light up while the LinkStation is on.
The white power LED blinks while booting or shutting down.
The red power LED blinks when an error occurs.
If there is a status message, the power LED blinks amber.
If there is new firmware available, the power LED glows amber.
The white power LED will light up while the LinkStation is on.
The white power LED blinks while booting or shutting down.
The red power LED blinks when an error occurs.
If there is a status message, the power LED blinks amber.
If there is new firmware available, the power LED glows amber.
3
Power Button
To power on, connect the power cable, then press the power button. To power off, hold down the power
button for 3 seconds.
To power on, connect the power cable, then press the power button. To power off, hold down the power
button for 3 seconds.
4
Function LED
This LED glows white while the LinkStation is being initialized and while dismounting USB devices. It blinks
white during Direct Copy.
For enclosure model, the red function LED glows when turning the LinkStation on to the initial hard drive
installation and blinks after pushing the function button.
This LED glows white while the LinkStation is being initialized and while dismounting USB devices. It blinks
white during Direct Copy.
For enclosure model, the red function LED glows when turning the LinkStation on to the initial hard drive
installation and blinks after pushing the function button.
5
Function Button
Use this button for Direct Copy, dismounting USB devices, and initializing settings.
Use this button for Direct Copy, dismounting USB devices, and initializing settings.
6
USB 3.0 Port
Compatible Buffalo USB 3.0 hard drives, USB flash drives, digital cameras, and USB printers can be connected.
USB hubs are not supported.
Compatible Buffalo USB 3.0 hard drives, USB flash drives, digital cameras, and USB printers can be connected.
USB hubs are not supported.
7
USB 2.0 Port
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB printers can be connected. USB
hubs are not supported.
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB printers can be connected. USB
hubs are not supported.