Buffalo LinkStation 441D 12TB LS441D1204-EU Data Sheet

Product codes
LS441D1204-EU
Page of 105
96
Click the 
 icon in the Dock to start NAS Navigator2.
Double-click the LinkStation icon or click the LinkStation icon while holding down the control key, then select 
Open Folder. Enter a username and password with the rights to access the shared folder.
Select the shared folder to mount and click OK.
The shared folder is now mounted as a network drive.
Changing the IP Address
Click the 
 icon in the Dock to start NAS Navigator2.
Hold down the control key, select your LinkStation, and choose Configure - IP Address.
Uncheck "Use DHCP", enter the desired settings and the administrator password, then click Apply.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,