Xbk Kabel LED outdoor floodlight 3.6 W Neutral white 20560 Silver 20560 Data Sheet

Product codes
20560
Page of 8
LED Floodlight 3.8 W
Version 
11/12
Item no. 57 74 62
1.  Intended use
The LED floodlight is intended for illuminating house entrances, driveways, etc. It may be
installed outdoors (take into account the installation location!).
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If 
you use the product for purposes other than those described above, the product may be 
damaged. In addition, improper use can cause hazards such as short circuiting, fire, electric
shock etc. Read the instructions carefully and keep them. Make this product available to 
third parties only together with its operating instructions. 
This product complies with the applicable National and European requirements. All names 
of companies and products are the trademarks of the respective owner. All rights reserved.
2.  Delivery content
•  LED floodlight
•  Operating instructions
3.  Explanation of the Symbols
The lightning symbol in a triangle is used to alert you to potential risks for 
personal injury, such as electric shock.
This symbol indicates specific risks associated with handling, function and use.
Defective safety glass must be replaced immediately; if the safety glass 
is defective the product must not be used.
Keep a minimum distance between the light emitting openings and the 
illuminated  surfaces  (e.g.  easily  flammable  objects,  such  as  curtains,
etc.). The appropriate minimum distance is specified on the bulb (in the
illustration to the left, the minimum distance is 1 m).
IP65
The product is suitable for use outdoors.
The product is not dimmable.
 
Please refer to the operating manual!
4.  Safety instructions
Read the operating instructions carefully and especially observe the safety 
information. If you do not follow the safety instructions and information on 
proper handling in this manual, we assume no liability for any resulting 
personal injury or damage to property. Such cases will invalidate the 
warranty/guarantee.
In general
•  The design of the product complies with protection class I, the protective earth conductor 
must be connected.
•  Do not leave packaging material carelessly lying around since it could become a 
dangerous plaything for children.
•  Any maintenance or repair work may only be performed by an authorised repair shop.
•  In commercial institutions, the accident prevention regulations of the employer’s liability 
insurance association for electrical systems and operating facilities are to be observed!
•  If you have any questions that are not answered in this instruction manual, please 
contact our technical support centre or consult a professional.
Operation
•  The product is not a toy. Keep devices that operate on the mains voltage out of the reach 
of children. Therefore, be especially careful when children are around.
•  Install and use the product where it is out of the reach of children.
•  The product is suitable for use outdoors; however, it must never be used in water!
•  The product may only be operated on the mains voltage (see section „Technical data“).
•  The product must not be exposed to extreme temperatures, strong vibrations or heavy 
mechanical stress. Only use the product when it is firmly mounted/steady.
•  Handle the product with care, it can be damaged by impacts, blows, or accidental drops, 
even from a low height.
•  Do not use this product in rooms or under adverse ambient conditions where combustible 
gases, vapours or dust are or may be present! There is a risk of explosion!
•  Attention, LED light: Do not look directly into the LED light! Do not look into the beam 
directly or with optical instruments!
•  Never cover the product when it is in use. Do not hang decoration materials on the lamp. 
Fire hazard!
•  Check the product for damage before each use! If you find any damage, you must not
use the product.
•  If you detect any damage while the product is in use, do not touch the product, there is 
a danger of an electric shock!
•  Disconnect all poles of the light from the power supply (e.g. switch off at the corresponding 
circuit breaker or remove the fuse and, additionally, switch of at the corresponding earth 
leakage circuit breaker).
•  If you observe any damage, do not use the product any longer, take it to a specialised 
workshop or dispose of it in an environmentally friendly manner.
•  A safe operation can no longer be assumed, if:
 - the product shows visible signs of damage,
 - the product does not function or does not function properly (e.g, a burning smell, 
flickering)
 - the product was transported or stored under unfavourable conditions.
1
2
3
4
5