Siemens MICROMASTER 420 0.55 kW 1-phase frequency inverter, 230 Vac to , 6SE6420-2AB15-5AA1 6SE6420-2AB15-5AA1 Data Sheet

Product codes
6SE6420-2AB15-5AA1
Page of 16
4
Getting Started Guide – September 2000
6SE6400-5AB00-0BP0
2 Electrical 
Installation
!
Warning
  Before electrical installation, set the power supply frequency for
Europe or North America. For operation on the North American
Power Supply, set the DIP-Switch (2) to 60 Hz (up). For operation
on the European Power Supply, leave the DIP-Switch (2) in the
default position 50 Hz (down).
  When installing the inverter after a period of storage please refer to
Section 2 of the Operating Instructions
  DIP-Switch 1 is not used.
230V
400 V / 230 V (North America)
Single Phase
Three Phase
U V W
o o o
o o o

o o o
U V W
o o o
o o o

o o o
Delta connection
Star connection
230 V single phase
400 V / 230 V three phase
Note
Motors above 11kW are normally configured 400V Delta or 690 V
Star. Motor should be connected appropriately according to the
output voltage of the inverter. For further information refer to the
Operating Instructions of the motor.