Leitz Icon 70010000 User Manual

An optional, external, rechargeable battery (part number 7002-00-00) is available for using the printer as a portable device. 
Visit the Leitz website at www.leitz.com for information about ordering the optional battery.

The battery connects to the back of the printer. The four guides on the battery help to align the battery for a secure 
connection to the printer. 

Tilt the battery and slide the top hooks into the top two slots on the back of the printer as shown.

Rotate the bottom of the battery downwards toward the bottom of the printer until the bottom guides on the battery are 
aligned with the bottom two slots on the back of the printer.
Make sure the connector on the bottom corner of the battery aligns with the battery connector on the back of the 
printer.

Gently press the bottom of the battery in toward the printer until the battery snaps into place.

The battery charges when connected to the printer and the printer is connected to a power source. Charging pauses 
temporarily during printing. The battery can be used portably for approximately 4 hours, printing up to 500 address labels, 
on a single charge. The charge level of the battery is displayed in the Leitz Icon Software print pane.

Connect the battery to the printer as described in Connecting the Battery.

Plug the power cord into the power adapter.

Plug the power adapter into the power connector on the back of the printer.

Plug the power cord into an available power outlet.