Carson Pistol grip RC 2.4 GHz No. of channels: 3 500500035 User Manual

The transmitter requires 4 conventional or 
 rechargeable AA (Mignon) batteries for operation.

Once you switch on the On/Off switch, the 
transmitter  is ready for use.

After the transmitter has been switched on, the 
battery voltage will appear in “V” on the LCD 
display and, below it, the model name/number last 
selected will be displayed.

Settings are changed by means of the “SEL”, “CH”, 
“+” and “-“ buttons.

1.  Press +/- to select the desired model. You have 

the choice of 15 memory spaces. The model 
number and model name are indicated on the 
LCD display.

2.  Press “SET” to take you to the desired setting. The 

following functions are available for selection:

•   “REV” setting (reverse direction of servo rotation)

  Press the “CH” button and choose between ST, 

TH or 3CH. Press +/- for normal or reverse.

•   “EPA” setting (servo travel limiter)

  Press the “CH” button and choose between TH or 

ST. To select the direction of rotation, the throttle 
must be to the front or back with TH, and the 
steering wheel must be moved left or right with 
ST. The display shows LFU for left and forwards 
and RBU for right and brake. The desired value 
can be set between 0 and 120% by means of +/-. 

•   ABS setting (anti-blocking system)

  Press +/- for ABS on or ABS off.

•   EXP setting (exponential)

  Press the “CH” button and choose between ST 

(steering), FW (forwards) and BK (brake). The 
desired exponential value can be set between 
-100% and 100% by means of +/-.

•   MODEL NAME (enter name of model)

  Press the CH button until you come to the model 

name setting. The characters 0 - 9 and A - Z can 
be entered by means of +/-.

3.   ST-TRIM (trimming the steering)

  Press TRIM-ST+ or TRIM-ST- to change the neutral 

position of the steering servo. 

  It may be adjusted from 0 - 100% right to 

0 - 100% left.

4. TH-TRIMM (trimming the throttle)

  Press TRIM-TH+ or TRIM-TH- to change the 

 neutral position of the throttle servo. 

  It may be adjusted from 0 -100% throttle to 

0 - 100% brake.

5.  D/R ST setting (dual rate steering) 

   Dual rate increases or reduces the servo travel 

in relation to the travel of the steering wheel/
throttle proportionally over the entire servo path.

  Press D/R ST+ or D/R ST- to change the dual rate 

setting of the steering. 

  A value between 0 and100% may be set.

6.  D/R TH setting (dual rate throttle) 

  Press D/R TH+ or D/R TH- to change the dual rate 

setting of the throttle. 

  A value between 0 and 100% may be set.

7.  To close the settings, press the SEL button until 

the battery display reappears. 

  Then the newly entered values are automatically 

saved.