Carson Pistol grip RC 2.4 GHz No. of channels: 3 500500035 User Manual

1.  Set the throttle and the steering wheel to the 

normal position.

2.  Turn on the transmitter and receiver.

3.  Press the F/S SET button, the LED on the receiver 

should start flashing.

4.  Put the throttle trigger at the brake position, 

press the “F/S SET” button, the LED should 
become solid.

5.  For electric models, put the throttle trigger at the 

stop position when you are making the failsafe 
setting.

As soon as the receiver/transmitter signal is inter-
rupted, the receiver switches to the default throttle 
failsafe setting.

The Reflex Wheel Pro2 is fitted with the „Failsafe 
pro +“ system. This system also has integrated low 
voltage protection. As soon as the voltage is too 
low for safe operation, the receiver also switches to 
the default throttle failsafe setting.

1.  Turn on the receiver power. 

Press the SW switch. The 
receiver’s LED should start 
flashing.

2. Turn on the 

transmitter.

3.  When the LED on the receiver  

becomes solid, the binding 
process is completed. The RC 
system is ready.

Keep the transmitter and receiver not over 
40 cm apart when setting and binding.