Superrollo Professional REMOTE FOR GARAGE DOOR DRIVE TA50 SR40080 Data Sheet

Product codes

SR40080

Functional description/emergency release

In the event of a power cut, the door can be operated

manually by pulling the emergency release cable.
There is a risk of injury. The door can fall

un-controllably when it is released (e.g. if

springs are weak or broken, or if the door is

not properly balanced).
◆

Always close or open the door fully after each release.

◆

The emergency release is not intended for

„everyday use“.

Important installation instructions

Before installation check...:
◆

...whether your door operator is suitable for the type

of garage door and the garage door height.
◆

...that the door is in a perfect mechanical state. The

door must be smooth running and be balanced.

Check whether it opens and closes properly;
Open the door approx. 1 metre and let go. A

balanced door should now remain in this position.

If not, have your door adjusted by a specialist

company.
◆

The door operation must not be hindered by in-

correctly adjusted springs or by incorrectly func-

tioning door suspensions or door constructions.

Before installing the drive...,

....remove all unnecessary ropes or chains and disable

any equipment, such as locks, not needed for powered

operation.

STOP

During installation there is a danger of injury

due to the unsecured door falling suddenly.
◆

During the installation work, ensure that there are

no persons in the swivelling area of the garage door.

CAUTION

Important instructions for a safe installation.

Follow all installation instructions carefully.
An incorrect installation can lead to serious

injuries.

Faulty installation can result in serious ac-

cidents and injuries.
◆

Fit the actuator for the emergency release at a height

of less than 1.8 metres.
◆

Use only the enclosed mounting materials and only

original spare parts and original accessories.
◆

Any existing door locking devices already fitted to

the door may hinder the correct functioning of the

door and must therefore be removed.
◆

Poor lighting hinders the installation work and can

result in injuries. Ensure that there is adequate

lighting during installation work.
◆

It is possible that during the installation work, you

may not be able to open the door for a short period

of time.
◆

Drive is not to be used with doors having openings exceeding

10 mm in diameter or having edges or protruding parts

a person could grip or stand on.