CHIPDRIVE 905463 Data Sheet
CHIPDRIVE® Time Recording
54
6.3 Additional Terminal Settings
6.3.1 Date and Time
As soon as the computer is connected to the terminal, the date and time setting is verified by the
minute, and can be reset if necessary. To set the date and/or time on a device running in offline mode,
open the Clock Setup and Time Setup settings.
minute, and can be reset if necessary. To set the date and/or time on a device running in offline mode,
open the Clock Setup and Time Setup settings.
6.3.2 Display Setup
Open the main menu (see chapter 6.2.1.1). To modify the display setup, select the menu item Clock
Setup at the bottom left, then click on Display Setup. Use the OK key to move the selection from one
item to the next, and use the arrow keys to select the desired option.
Setup at the bottom left, then click on Display Setup. Use the OK key to move the selection from one
item to the next, and use the arrow keys to select the desired option.
Language (English, German, French, Spanish etc.)
DateFormat (DD-MM-YYYY, YYYY-MM-DD, MM-DD-YYYY)
TimeFormat (24 hours, AM/PM)
FP Image (Show, Hide)
6.3.3 Advanced Setup – FP Precision
Select FP Precision to open the Fingerprint Matching Precision Setup screen. Use these settings to fine-
tune the rules for accepting or rejecting fingerprints.
tune the rules for accepting or rejecting fingerprints.
Fingerprint Matching Precision Setup
1 : N
50%
_______
1 : 1
10%
_______
AutoUpdate
Yes
-_______ _
VerifyMode
_
Setup
User Verify Mode
_
Setup
1 : N (10% … 90%)
If a person is to be recognized solely by his/her fingerprint, the 1:N setting applies. The terminal will
compare the captured fingerprint with all stored patterns. This 90% setting requires the highest possible
match rate.
compare the captured fingerprint with all stored patterns. This 90% setting requires the highest possible
match rate.
1 : 1 (10% … 90%)
If the person number is typed in before the fingerprint is scanned, the terminal matches the fingerprint
against the patterns stored for that person only. It is very unlikely that another person has an identical
fingerprint record. Therefore it is no problem if you wish to reduce the match rate.
against the patterns stored for that person only. It is very unlikely that another person has an identical
fingerprint record. Therefore it is no problem if you wish to reduce the match rate.
AutoUpdate (Yes, No)
The terminal analyzes the quality of fingerprints. The AutoUpdate feature will automatically replace an
existing low-quality pattern by a better-quality pattern for the respective person.
existing low-quality pattern by a better-quality pattern for the respective person.