CHIPDRIVE 905463 Data Sheet
CHIPDRIVE® Time Recording
57
Time Clock Options
Volume
0 – 5
Password
12345
Device ID
2
(max. 4 digits)
Reboot
Enable
Time point
3:00:00 AM
Reset to factory settings
Select Reset to factory settings only in case of utmost emergency, because if you do, all saved data is
lost! If a reset is unavoidable or triggered inadvertently due to severe malfunctioning, it is still possible
to restore person-related data.
lost! If a reset is unavoidable or triggered inadvertently due to severe malfunctioning, it is still possible
to restore person-related data.
To do so, make sure that the device is communicating with the PC Time Clock Server installation again
after the reset (see chapters 3.4.4 and 6.2.1.1). It is essential that the same IP address and the same
device ID are set. If you are using more than one fingerprint terminal, you only need to synchronize the
terminal with the lost data with one of the other devices. This will only take a few minutes. If you are
using one terminal, open the PC Time Clock Server program, and select Clients / Fingerprint Terminals.
Highlight the terminal in the list, and click on Restore personal data on terminal.
after the reset (see chapters 3.4.4 and 6.2.1.1). It is essential that the same IP address and the same
device ID are set. If you are using more than one fingerprint terminal, you only need to synchronize the
terminal with the lost data with one of the other devices. This will only take a few minutes. If you are
using one terminal, open the PC Time Clock Server program, and select Clients / Fingerprint Terminals.
Highlight the terminal in the list, and click on Restore personal data on terminal.
6.4 Creating Users
To assign the users of a fingerprint terminal to persons configured in CHIPDRIVE Time Recording, the
person numbers have to match. In CHIPDRIVE Time Recording, person numbers are created
automatically. You have to remember to enter the person numbers when you create persons on a
terminal. The following assumes that the person in question already has a CHIPDRIVE Time Recording
account including the permission to make clocking entries via fingerprint. The creation of persons and
assignment of licenses from the License Card are described in chapter 1.5.
person numbers have to match. In CHIPDRIVE Time Recording, person numbers are created
automatically. You have to remember to enter the person numbers when you create persons on a
terminal. The following assumes that the person in question already has a CHIPDRIVE Time Recording
account including the permission to make clocking entries via fingerprint. The creation of persons and
assignment of licenses from the License Card are described in chapter 1.5.
To print an overview with names and numbers, select Report / Current Overview, and print an
attendance list from the respective window.
attendance list from the respective window.
Ask the person that you would like to create to come to the terminal. Log on as administrator, and open
the main menu. Select Manage User and then Add User.
the main menu. Select Manage User and then Add User.