Philips HD3620 HD3620/25P1 Data Sheet

 4 

 Push down the blue locking levers until they are in horizontal 

position.

If you are unable to put the locking levers in horizontal position, you have 

not put the keg into the appliance in the right position. Take out the keg 

and follow steps 1 to 3 again.

 

, After you have installed the keg (even the first time), the pump runs 

for a few seconds. 

 5 

 Close the doors.

cooling
After you have installed the keg, the appliance automatically starts to cool 

the keg. 
Note: At an ambient temperature of 23°C, chilling an uncooled keg takes  

For more tips, see chapter ‘Troubleshooting’.

 1 

 Wait until the beer has reached a drinking temperature of 4°C or 

below. 

 

, The temperature is shown on the display in green (see section ‘LCD 

display’ in this chapter).

 

, The display shows the temperature of the beer, the beer level inside 

the keg and the freshness of the beer. 

Wait until the temperature of the keg has dropped below 4°C before you 

start to pour beer. The ideal drinking temperature is 3°C. 

The colour of the temperature displayed tells you if the beer has reached 

the right drinking temperature.

 - Red = the beer temperature is not yet ideal for consumption (above 

4°C). The beer head may be too large. 

 - Green = the beer has reached the right temperature (4°C or below) 

for consumption. 

The yellow-orange level indication on the display shows the amount of 

beer left in the keg in eight steps.

11