Tripp Lite DataShield In-Line Surge Protector for Network and Phone Lines, 1-Line RJ45 DNET1 Data Sheet

MODEL NUMBER: DNET1

 

Tripp Lite's DNET1 provides network Ethernet line surge suppression for 100Base-T, 10Base-T, Token Ring,

AS400/Sys3x and RS422 applications. Surge suppression is handled with balanced arrays of high-speed

avalanche diodes that divert excess energies created by electrostatic discharges, faulty wiring or lightning away

from network interface connections. Tripp Lite network surge suppressors reduce blown NIC cards, garbled

network transmissions, system lock-ups and hard equipment failure by safely shunting dataline surges to ground.

Convenient RJ45 input and output connections with an included 5-inch Ethernet patch cable enables ideal

protection for network workstations, printers and other internetworking devices with a network connection. For

peace of mind, the DNET1 comes with a lifetime warranty and RoHS-compliant design. 

DNET1 protects network workstations, printers and internetworking devices from surges present on

10/100Base-T, token ring, AS400/Sys3x or RS422 network lines

Convenient RJ45 input and output connections make for simple installation (RJ45 input/output connections,

pins 1-8, 7.5V clamping)

5 inch Ethernet patch cable enables ideal protection placed as close as possible to the point of use

Surge suppression utilizing high speed avalanche diodes divert excess energies on the network to ground

RoHS Compliance

Lifetime Warranty

Style

Direct Plug-In

Network Ethernet line surge

suppression for 100Base-T,

10Base-T, Token Ring,

AS400/Sys3x and RS422

applications

Ideal protection for NICs,

terminals, hubs, printers, LAN

equipment, and other

internetworking devices

Protects against the effects of

electrostatic discharge, faulty

wiring and lightning

Reduces blown NIC cards,

garbled network transmissions,

system lock-ups and hard

equipment failure

750A circuit breaker; 7.5V

nominal clamping voltage

RJ45 input and output

connections with included patch

cable

Ideal for the protection of network

workstations, printers and other

internetworking devices with a

network Ethernet connection

Ideal for NICs, terminals, hubs,

MAUs, LAN equipment

DNET1 dataline protector

5-in. RJ45 patch cable

Warranty information and

instruction manual

1 / 2