Tripp Lite 1.9kW Single-Phase ATS / Switched PDU, 120V (16 5-15/20R), 2 L5-20P / 5-20P Inputs, 2 12ft Cords, 1U Rack-Mount PDUMH20ATNET Data Sheet
Product codes
PDUMH20ATNET
1.9kW Single-Phase ATS / Switched PDU, 120V (16
5-15/20R), 2 L5-20P / 5-20P Inputs, 2 12ft Cords, 1U
Rack-Mount
5-15/20R), 2 L5-20P / 5-20P Inputs, 2 12ft Cords, 1U
Rack-Mount
MODEL NUMBER: PDUMH20ATNET
Description
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network
devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The
ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary
power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until
the primary input is restored and stable. Switched PDU features include individually controllable output
receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources
occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless
of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant
hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord
is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported
by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for
use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup
generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly
evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of
lower quality than the primary source. Front input LED's display primary or secondary power availability.
Features
120V 20A Power Distribution Unit (PDU) with Auto-Transfer Switch (ATS) and Switched outlets (Agency de-rated to 16A)
Provides a redundant A/B power option for non-redundant networking equipment with a single input power cord
Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface
Digital display continuously reports total output power consumption in amps
16 switched NEMA 5-15/20R outlets
1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depth
Set of two 12 ft. / 3.6m NEMA L5-20P input cables with set of two 5-20P adapters support connection to separate PRIMARY and SECONDARY inputs
Highlights
Single phase 20A 120V Auto
Transfer Switch / ATS PDU
Enables redundant A/B power
option for single-corded network
devices
Separate primary & secondary
inputs connect to any two
compatible power sources
1U horizontal rackmount; 2
L5-20P / 5-20P inputs; 16
5-15/20R outlets
Individually switched outlets and
Built-in network interface for
remote control and monitoring;
Two digit visual current meter
Applications
Auto-Transfer Switch / Switched
PDU is ideal for providing
switched outlet functionality and
redundant A/B power to
single-corded network equipment
Package Includes
ATS / Switched PDU with
attached L5-20P input power cord
Detachable C19 to NEMA
L5-20P 12 ft/3.6m secondary
input cord
Two NEMA L5-20R to NEMA
5-20P plug adapters
Installable 1U mounting brackets
User manual with warranty
information
1 / 4