Tripp Lite SmartOnline 200-240V 16kVA 14.4kW On-Line Double-Conversion UPS, N+1, Extended Run, SNMP, Webcard, 12U Rack/Tower, USB, DB9 Serial SU16KRT Data Sheet

Output AC Waveform (Battery Mode)

Pure Sine wave

Rated input current (Maximum Load)

92A (200V), 88.4A (208V), 76.6A (240V)

Nominal Input Voltage(s) Supported

200V AC; 208V AC; 240V AC

UPS Input Connection Type

Hardwire

UPS Input Connection Description

3 wire single phase input (L1, L2, G)

Recommended Electrical Service

100A @ 200V, 208V, or 240V (L1, L2, G)

Input Phase

Single-Phase

Full Load Runtime (min.)

5.5 minutes (14,400 watts)

Half Load Runtime (min.)

13.5 minutes (7200 watts)

Expandable Battery Runtime

Runtime is expandable with external battery packs

External Battery Pack Compatibility

Expandable Runtime Description

For best results, add external batteries in multiples of two so that both included 8kVA power modules have an equal
number and type of connected battery packs

DC System Voltage (VDC)

240

Battery Recharge Rate (Included
Batteries)

Less than 6 hours from 10% to 90% (typical, full load discharge)

Battery Replacement Description

Hot-swappable, user replaceable external battery packs

Voltage Regulation Description

2% output voltage regulation in standard online, double-conversion mode

Overvoltage Correction

Corrects overvoltages up to 300V

Undervoltage Correction

Corrects undervoltages as low as 100V

Front Panel LCD Display

Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options;
LED/LCD panel rotates for viewing in rack/tower formats; LCD Display supports ENGLISH, FRENCH, GERMAN,
ITALIAN, SPANISH and PORTUGUESE (see manual)

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and
execute scrolling LCD functions; bundled PDU includes bypass switch to enable hot-swap UPS power module
replacement

Alarm Cancel Operation

Alarm cancel switch

Audible Alarm

Unique audible alarms for all major UPS, environmental and power conditions (see manual)

LED Indicators

6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD
screen offers additional information and control options

3 / 6