Tripp Lite SmartOnline 200-240V 12kVA 10.8kW On-Line Double-Conversion UPS, N+1, Extended Run, SNMP, Webcard, 8U Rack/Tower, USB, DB9 Serial, Hardwire SU12KRT4UHW Data Sheet

Output AC Waveform (AC Mode)

Pure Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Rated input current (Maximum Load)

63.8A (200V), 61.2A (208V), 58A (220V), 55.4A (230V), 53.2A (240V)

Nominal Input Voltage(s) Supported

200V AC; 208V AC; 220V AC; 230V AC; 240V AC

UPS Input Connection Type

Hardwire

UPS Input Connection Description

Supports North American 208/240V input (L1,L2,G) and International 230/220/240V (L,N,PE) input wiring

Recommended Electrical Service

70A

Input Phase

Single-Phase

Full Load Runtime (min.)

2 minutes (10,800 watts)

Half Load Runtime (min.)

8.5 minutes (5400 watts)

Expandable Battery Runtime

Runtime is expandable with external battery packs

External Battery Pack Compatibility

Expandable Runtime Description

For best results, add external batteries in multiples of two so that both included 6kVA power modules have an equal
number and type of connected battery packs

DC System Voltage (VDC)

192

Battery Recharge Rate (Included
Batteries)

Less than 6 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery
Cartridge

Each of the two included 6kVA power modules contain one 

Battery Access

Front panel battery access door

Battery Replacement Description

Hot-swappable, user replaceable internal battery cartridges and external battery packs

Voltage Regulation Description

+/-2% output voltage regulation in standard online, double-conversion mode

Overvoltage Correction

Corrects overvoltages as high as 300V (<90% load) and 280V (full load)

Undervoltage Correction

Corrects undervoltages as low as 100 (<50% load) and 155V (full load); derates linearly

Front Panel LCD Display

Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options;
LED/LCD panel rotates for viewing in rack/tower formats (see manual)

Switches

Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions. A manual bypass
switch featured on the detachable PDU allows for complete removal of the UPS during routine maintenance without
disrupting power to connected loads

Alarm Cancel Operation

Alarm cancel switch

Audible Alarm

Unique audible alarms for all major UPS, environmental and power conditions (see manual)

3 / 6