Tripp Lite SmartOnline 110-120V 3kVA 2.4kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 3U Rack/Tower, USB, DB9 Serial, Hardwire SU3000RTXR3UHW Data Sheet

Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types

Corrects line voltage conditions as low as 65V and as high as 150V back to selectable 110/120V (+/-2%) values

Highly efficient operation in optional economy mode setting, saving BTU heat output and energy costs

Internal battery set offers 30 minutes runtime at half load (1200W) and 12 minutes at full load (2400W)

Optional BP72V15-2U (limit 1), BP72V28RT-3U (multi-pack compatible) and BP72V18-2US (multi-pack compatible) external battery packs

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)

Compact rackmount form factor installs using only 3 rack spaces (3U) with a maximum installed depth of 26 inches

Ships with all mounting accessories for 4 post rackmount installation

Optional 2POSTRMKITHD enables 2 post rackmount installation

Optional 2-9USTAND accessory enables small-footprint upright tower placement

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions

Network interfaces support simultaneous communications via built-in USB, DB9 serial/contact-closure and SNMPWEBCARD slot

HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number

of additional servers over IP

UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery

capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment

and UPS line to battery power voltage setpoints

Built-in Emergency Power Off (EPO) interface with cable

Hardwire 120V AC input/output (L-N-G)

Front panel LEDs offer current monitoring and battery charge level information

Single line TEL/DSL or network ethernet line surge suppression

$250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)

Output Capacity Details

OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% load for 3 minutes; 150%
load for 30 seconds and >150% load for 0.5 seconds before switching to BYPASS (when bypass input voltage and
frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE
bypass limits)

Output Volt Amp Capacity (VA)

3000

Output kVA Capacity (kVA)

3

Output Watt Capacity (Watts)

2400

Output kW Capacity (kW)

2.4

Power Factor

0.8

Crest Factor

3:1

Nominal Output Voltage(s)
Supported

110V; 120V

Nominal Voltage Details

120V default

Frequency Compatibility

50 / 60 Hz

2 / 6