Intel 1.70 GHz RH80532NC029256 Data Sheet

10 Datasheet

 

298517-006 

Using Intel’s advanced 0.13-micron process technology with copper interconnect, the Mobile Intel 
Celeron Processor offers high-performance and low-power consumption.  The Mobile Intel Celeron 
Processor (0.13µ) in Micro-FCBGA and Micro-FCPGA packages (hereafter referred to as “the Mobile 
Intel Celeron Processor”) is based on the same core as existing mobile Intel

®

 Pentium

®

 III Processor-M. 

Key performance features include Internet Streaming SIMD instructions, an Advanced Transfer Cache 
architecture, and a processor system bus speed of 133 MHz.  The Low Voltage and Ultra Low Voltage 
Mobile Intel Celeron Processors will support both a 133-MHz and 100-MHz bus speed.  These features 
are offered in Micro-FCPGA packages for socketable boards and Micro-FCBGA packages for surface 
mount boards.  The Low Voltage and Ultra Low Voltage Mobile processors will be available only in the 
Micro-FCBGA package.  The Mobile Intel Celeron processors at 1.45 V and at 1.50 V are available only 
in the Micro-FCPGA package.  All of these technologies make outstanding performance possible for 
mobile PCs in a variety of shapes and sizes. 

The 256-KB integrated L2 cache based on the Advanced Transfer Cache architecture runs at full speed 
and is designed to help improve performance. It complements the system bus by providing critical data 
faster and reducing total system power consumption. The processor also features Data Prefetch Logic 
that speculatively fetches data to the L2 cache, resulting in improved performance. The Mobile Intel 
Celeron Processor’s 64-bit wide Assisted Gunning Transceiver Logic (AGTL) system bus provides a 
glue-less, point-to-point interface for a memory controller hub.   

This document covers the electrical, mechanical, and thermal specifications for the following: 

•  The Mobile Intel Celeron Processor at the following frequencies and voltages: 1.33 GHz at 1.50 

V; 1.2 GHz, 1.13 GHz, 1.06 GHz at 1.45 V; and 1.266GHz, 1 GHz at 1.40 V. 

•  The Low Voltage Mobile Intel Celeron Processor at the following frequencies and voltages: 866

 

MHz, 733 MHz and 650 MHz at 1.15 V. 

•  The Ultra Low Voltage Mobile Intel Celeron Processor at the following frequencies and voltages: 

800 MHz, 733 MHz, 700 MHz, and 650 MHz at 1.10 V. 

•  Unless explicitly stated, all references to the Mobile Intel Celeron Processor (0.13 µ) in Micro-

FCBGA and Micro-FCPGA packages in this document also apply to the Low Voltage and Ultra 
Low Voltage Mobile Intel Celeron Processor (0.13 µ) in the Micro-FCBGA package. 

•  Performance features 

—  Supports the Intel Architecture with Dynamic Execution 
—  Supports the Intel Architecture MMX™ technology 
—  Supports Streaming SIMD Extensions for enhanced video, sound, and 3D performance 
—  Integrated Intel Floating Point Unit compatible with the IEEE 754 standard 
—  Data Prefetch Logic 

•  On-die primary (L1) instruction and data caches 

—  4-way set associative, 32-byte line size, 1 line per sector 
—  16-Kbyte instruction cache and 16-Kbyte write-back data cache 
—  Cacheable range controlled by processor programmable registers