Intel 4 662 HH80547PG1042MH Data Sheet
Product codes
HH80547PG1042MH
Datasheet
95
Boxed Processor Specifications
7.3
Thermal Specifications
This section describes the cooling requirements of the fan heatsink solution used by the boxed
processor.
processor.
7.3.1
Boxed Processor Cooling Requirements
The boxed processor may be directly cooled with a fan heatsink. However, meeting the processor's
temperature specification is also a function of the thermal design of the entire system, and
ultimately the responsibility of the system integrator. The processor temperature specification is
found in
temperature specification is also a function of the thermal design of the entire system, and
ultimately the responsibility of the system integrator. The processor temperature specification is
found in
of this document. The boxed processor fan heatsink is able to keep the
processor temperature within the specifications (see
) in chassis that provide good
thermal management. For the boxed processor fan heatsink to operate properly, it is critical that the
airflow provided to the fan heatsink is unimpeded. Airflow of the fan heatsink is into the center and
out of the sides of the fan heatsink. Airspace is required around the fan to ensure that the airflow
through the fan heatsink is not blocked. Blocking the airflow to the fan heatsink reduces the
cooling efficiency and decreases fan life.
airflow provided to the fan heatsink is unimpeded. Airflow of the fan heatsink is into the center and
out of the sides of the fan heatsink. Airspace is required around the fan to ensure that the airflow
through the fan heatsink is not blocked. Blocking the airflow to the fan heatsink reduces the
cooling efficiency and decreases fan life.
illustrate an acceptable
airspace clearance for the fan heatsink. The air temperature entering the fan should be kept below
38 ºC. A thermally Advantaged Chassis with an Air Guide 1.1 is recommended to meet the 38 °C
requirement. Again, meeting the processor's temperature specification is the responsibility of the
system integrator.
38 ºC. A thermally Advantaged Chassis with an Air Guide 1.1 is recommended to meet the 38 °C
requirement. Again, meeting the processor's temperature specification is the responsibility of the
system integrator.
Note:
The processor fan is the primary source of airflow for cooling the V
CC
voltage regulator. Dedicated
voltage regulator cooling components may be necessary if the selected fan is not capable of
keeping regulator components below maximum rated temperatures.
keeping regulator components below maximum rated temperatures.
Figure 7-7. Boxed Processor Fan Heatsink Airspace Keepout Requirements (Top View)