Philips Table lamp 70999/60/PH 7099960PH Data Sheet
Product codes
7099960PH
Step 3:
You still need to connect the additional remote to the LivingColors. If you have two round remotes, you can do it easily by re-
peating the above action (bring two remotes close, then press on “I” until they stop blinking intermittently). This action needs to be done
directly after connection of the additional remote control. The additional remote is now connected to the same lights as the first remote
control.
directly after connection of the additional remote control. The additional remote is now connected to the same lights as the first remote
control.
10 sec.
=
Solution 1: Perform LivingColors and battery check
1.
Unplug your LivingColors from the power network, plug it back in and check whether it reacts to the remote control.
2.
Remove and reinsert batteries. The batteries should be correctly placed and inserted (+ and -). Check if batteries are charged.
3.
If the remote control is still not working, try replacing the batteries.
4.
If necessary, connect the remote control to the LivingColors again (same way as connecting multiple LivingColors to
one remote control).
max 5cm
10sec
=
Solution 2: Perform a channel switch
In rare cases, problems with the connection between your LivingColors and the remote control could be caused by heavy traffic on the
wireless network (e.g. a wireless router). Try moving the light away from the router or follow below procedure. Make sure that all Living-
Colors connected to the remote control are switched on, otherwise they will not respond after this action.
For the round remote control (with mechanical wheel), simultaneously press the “I”-button and “Favourite 2”-button for 5 seconds.
For the round remote control (with touch control), simultaneously press the “I”-button and “Scene 3”-button for 5 seconds.
For the long oval remote control, simultaneously press the “0”-button and saturation up button for 5 seconds.
The LivingColors will show an orange and then a green light for 1 second and then they revert to their previous setting. White lights
(LivingWhites) first blink once, then rapidly blink twice and revert to previous setting.
wireless network (e.g. a wireless router). Try moving the light away from the router or follow below procedure. Make sure that all Living-
Colors connected to the remote control are switched on, otherwise they will not respond after this action.
For the round remote control (with mechanical wheel), simultaneously press the “I”-button and “Favourite 2”-button for 5 seconds.
For the round remote control (with touch control), simultaneously press the “I”-button and “Scene 3”-button for 5 seconds.
For the long oval remote control, simultaneously press the “0”-button and saturation up button for 5 seconds.
The LivingColors will show an orange and then a green light for 1 second and then they revert to their previous setting. White lights
(LivingWhites) first blink once, then rapidly blink twice and revert to previous setting.
What to do if your LivingColors is not responding properly?