Philips LCD monitor with MultiView 298P4QJEB 298P4QJEB/00 Data Sheet
Product codes
298P4QJEB/00
11
2. Setting up the monitor
2. The
MultiView
selection menu appears.
Press ▲ or ▼ button to select.
3. Press
button to confirm your selection
and then exit automatically.
How to enable MultiView by OSD menu?
Besides pressing the hotkey
directly on
the front bezel
, the MultiView function can also
be selected in OSD menu.
1. Press button on the front bezel to
enter OSD Menu Screen.
2. Press ▲ or ▼ button to select main menu
[PiP / PbP], then press
button.
3. Press ▲ or ▼ button to select [PiP / PbP
Mode], then press
button.
4. Press ▲ or ▼ button to select
[PiP] or
[PbP]
.
5. Now you can move backward to set the
[PiP / PbP Input], [PiP Size], [PiP Position].,
or [Swap].
6. Press
button to confirm your selection.
MultiView in OSD menu
• PiP / PbP Mode: There are two modes for
MultiView: [PiP] and [PbP].
[PiP]:
Picture in Picture
Open up a sub-window of
another signal source.
B
A
(main)
When the sub source is not
detected:
B
A
(main)
[PbP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source.
A
(main)
B
When the sub source is not
detected:
A
(main)
B
Note
The black strip shows on the top and the
bottom of the screen for the correct aspect
ratio when in the PbP mode.
• PiP / PbP Input: There are five different
video input to choose as the sub display
source: [VGA] (298P4QAJEB),[DVI],
[HDMI 1], [HDMI 2], and [DisplayPort].
Please refer below table for compatibility of
main/sub input source.
SUB SOURCE POSSIBILITY (xl)
Inputs
VGA DP DVI HDMI
1
HDMI
2
MAIN
SOURCE
(xl)
VGA
●
●
●
●
DP
●
●
●
●
DVI
●
●
HDMI 1 ●
●
HDMI 2 ●
●