Tripp Lite SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS, SNMP, Webcard pre-installed, 2U Rack/Tower, LCD, USB, DB9 Serial SMART2200RM2UN Data Sheet
Product codes
SMART2200RM2UN
SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine
Wave UPS, SNMP, Webcard pre-installed, 2U
Rack/Tower, LCD, USB, DB9 Serial
Wave UPS, SNMP, Webcard pre-installed, 2U
Rack/Tower, LCD, USB, DB9 Serial
MODEL NUMBER: SMART2200RM2UN
Description
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS)
with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels
while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in
exceptionally poor-power environments with two separate levels of voltage boost to correct both slight
undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed
UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover
from line to battery power occurs within milliseconds to maintain operation of connected equipment without
interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network
management interfaces support communications via USB, RS-232 and Pre-installed SNMPWEBCARD network
interface. HID-compliant USB port enables integration with built-in power management and auto shutdown
features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment
load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete
cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select
outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or
tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test.
Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART2200RM2UN line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W capacity
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA 5-20P input plug; 4 NEMA 5-15R & 4 NEMA 5-15/20R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Highlights
2.2kVA / 2200VA / 1920W line
interactive 2U rack/tower UPS;
0.9 power factor
120V nominal output during
brownouts to 83V and
overvoltages to 145V
Interactive LCD provides UPS
status information and advanced
configuration options
Hot-swap batteries, 96%
efficiency, Sine wave output
USB, RS232 & EPO ports,
Pre-installed SNMPWEBCARD
interface
2 independently switchable
output load banks
NEMA 5-20P input; 4 NEMA
5-15R & 4 5-15/20R outlets
Applications
Distributed Server Rooms
Network Closets
Small Business Networks
Voice over IP (VoIP) Phone
Systems
Package Includes
SMART2200RM2UN UPS
system with Pre-installed
SNMPWEBCARD
PowerAlert Software with USB,
Serial & EPO cabling
4 post rackmount installation kit
Instruction manual
1 / 6