Gigaset A380 S30852-H2005-D201 User Manual

AL18X/AL28X/A38X / UK / A31008-M2005-L101-1-7619 / starting.fm / 16.01.2009

The correct charge level can only be displayed if the batteries are first fully charged and 

discharged. 

Set the date and time so that the correct date and time can be assigned to incoming calls, 

and so that the alarm can be used. 

¢

¢

¢

¢

 

¢

¢

~

(enter the day, month and year in 6-digit format) 

¢

 

¢

¢

~

(enter hours and minutes in 4-digit format) 

¢

(display message: Saved) 

¢

a

(press and hold to return to idle status)

Once the phone is registered and the time set, the idle display 

is shown as in this example. 
If the answer machine is activated (A385), the answer machine 

icon 

×

will be displayed in the header. Your answer machine 

is set with a pre-recorded announcement.

Press and hold the 

a

 key to activate or deactivate the handset. 

If you place a deactivated handset in the base station or charging cradle, it will automat-

ically activate.
Your phone is now ready for use.
If you have any questions about using your phone, please read the tips on troubleshooting 

("Questions and answers" 

 p. 12) or contact our Customer Care team 

◆

Each key press interrupts the automatic registration.

◆

If automatic registration does not work, the handset will have to be registered 

manually (

◆

Only place the handset in the base station or charging cradle that is intended for 

it.

◆

After the first battery charge and discharge you may replace your handset in the 

base station or charging cradle after every call. 

◆

Always repeat the charging and discharging procedure if you remove the batteries 

from the handset and reinsert them.

◆

The batteries may warm up during charging. This is not dangerous.

◆

After a while, the charge capacity of the batteries will decrease for technical rea-

sons.

When entering the time and date, you can move the position of an entry to the left 

or right by pressing the control button up or down.

¤

Place the handset in the base station or charging cradle for eight hours.

¤

Then remove the handset from the base station or charging cradle and 

do not replace it until the batteries are completely discharged.

±

V