Intel C2518 FH8065501516710 Data Sheet

Intel

®

 Atom™ Processor C2000 Product Family for Microserver

September 2014

Datasheet, Vol. 2 of 3

Order Number: 330061-002US

263

The signal description table has the following headings:

• Signal Name: The name of the signal/pin
• Direction: The buffer direction is either input, output, or I/O (bi-directional)
• Type: The buffer type found in 

• Description: A brief explanation of the signal function

The Enhanced Host Controller (EHC) supports the following features:

• Compliant with the specification for USB 1.0, 1.1 and 2.0 (1.5 Mbps, 12 Mbps, 

480 Mbps).

— Supports all USB transactions: bulk, isochronous, interrupt, control.

• Supports an EHCI software host controller interface.
• All ports provided by a USB Rate Matching Hub (RMH) to support Full-Speed (FS) 

and Low-Speed (LS) USB devices.

• One debug port having full-speed transfer rates.
• Wake-up from G2 (S5) Soft Off back to the G0 (S0) working power state. 
• Asynchronous extended sleep.
• EHCI prefetch-based pause.
• Remote-suspend wake-up.
• Per-port USB disable.

I/O

 Bus Data/Address 

Command Bus

I

 This signal sets the corresponding bit in the 

USB controller to indicate that an over current condition has occurred. 

OC0 covers ports 0-3.
The OCMAP register for the USB refers to this input signal as OC1.
These signals are NOT 5V tolerant.
This signal is muxed and is used by other functions.

I

USB 96 MHz differential reference clock input

O

RCOMP OUT

I

RCOMP IN