Mackie MS1202 Leaflet

■

1. GENERAL CONFIGURA-
TION. The mixing console
shall accommodate 4
Balanced/Unbalanced Line
Inputs, 8 Unbalanced Line
Inputs, 4 Balanced Micro-
phone Inputs, 1 Balanced/
Unbalanced Main Left
Output, 1 Balanced/
Unbalanced Main Right
Output, 2 AUX Outputs, 2
Stereo AUX Returns,
4 Channel Access Jacks, 2
RCA Tape Out Jacks, 2 RCA
Tape In Jacks, and 1 Stereo
Headphone Output. The
main frame shall be capable
of placement on a table or
mounting in a standard 19-
inch rack mount via op-
tional rack rail brackets and
shall be entirely self-
contained.
2. METERING. The main
frame shall include two 12-
LED meters for monitoring
Main L/R Outputs or, when
the Input Metering button is
depressed., Mic Preamp
Outs and Mix Amp Output
(pre-fader).
3. MIXER INPUTS. The
mixer shall include elec-
tronically balanced mic
inputs using female XLR-3-

type connectors to accept
nominal levels of from
 –48dBU to +14dBU. The
mixer shall also have 12 line
inputs consisting of 4
balanced/unbalanced mono
and 4 stereo inputs, each a
standard 

1

/

4

"  phone jack that

shall accept nominal levels of
from –40dBU to +22dBU on
Channels 1 through 4 and –
25dBU to +22dBU on
Channels 5 through 12.
Channels 1 through 4 shall
have a rotary Trim Control
adjustable from +4dB to –
40dB. The Mixer shall have 2
Stereo AUX Returns and 4
tip-out/ring-in Channel
Inserts. The mixer shall
include stereo Tape Inputs
consisting of phono-type
connectors. The Tape Inputs
shall be present at the AUX
Return 2 Control when the
Tape Monitor switch is
pressed. There shall be a
phantom power supply with
separate switch to provide
+43/48V DC to all mic input
connectors for remote
powering of condenser
microphones.
4. MIXER OUTPUTS. The
mixer output shall be 

1

/

4

"

phone jack; there shall be 1
Left and 1 Right balanced/
unbalanced Main Outputs,
L/R RCA Tape Outputs, 2
AUX Outputs, and 1 Stereo
Headphone Output. Maxi-
mum Main Output shall be

®