Bose CineMate 1 SR Installation Guide
English – 11
S
YSTEM
S
ETUP
Step 2:
Connect source audio to the AUX input
What you need for this step:
Note: If you currently have audio/video sources such as a cable/satellite set-top box and
a DVD player connected to your TV, do not disconnect them. The audio output from the
source should be connected to the TV and to the CineMate 1 SR speaker array. Refer to
“Product overview” on page 6.
a DVD player connected to your TV, do not disconnect them. The audio output from the
source should be connected to the TV and to the CineMate 1 SR speaker array. Refer to
“Product overview” on page 6.
A. Plug one end of the digital audio cable into the corresponding AUX connector on the
speaker array.
Note: If you are using an optical cable, be sure to remove the protective cover from the
plug. When inserting the plug into the connector, make sure it is pushed in all the way.
You may sense a slight resistance before you feel it click into place.
plug. When inserting the plug into the connector, make sure it is pushed in all the way.
You may sense a slight resistance before you feel it click into place.
B. Plug the other end of the digital cable into the corresponding audio output connector
on the source.
Optical digital cable
Coaxial digital cable
OR
Coaxial
Digital audio
Digital audio
Optical
Digital audio
Digital audio
AUX
Hershey_Setup.book Page 11 Thursday, March 31, 2011 11:44 AM