Bose CineMate 1 SR Installation Guide

Page of 20
18 – English
S
YSTEM
 S
ETUP
A. Point the remote at the speaker array and press the system power button.
B. Check that the power indicator on the speaker array is on (white), indicating the 
system is on, and that the status indicator is off.
C. Put the ADAPTiQ
®
 headset on your head making sure 
the left and right sensors rest above your ears.
During the audio calibration the headset allows the 
CineMate
®
 1 SR system to hear exactly what you 
hear.
D. Slide the ADAPTiQ connector cover off the end of the speaker array.
E. Insert the ADAPTiQ
®
 headset cable into the ADAPTiQ headset connector until it is 
fully seated.
The status indicator on the speaker array will glow green and the ADAPTiQ 
calibration system will start automatically.
Power
Status
If the Status indicator is blinking orange:
• There is no wireless connection between the speaker array and the 
Acoustimass
®
 module.
• See the Troubleshooting table in the back of the operating guide and 
follow the instructions for correcting the problem of “No Sound.”
Sensor
ADAPTiQ
ADAPTiQ button
ADAPTiQ headset connector
ADAPTiQ connector cover
Hershey_Setup.book  Page 18  Thursday, March 31, 2011  11:44 AM
 
downloadlike
ArtboardArtboardArtboard