Bunn Ice Tea Maker AFPO-3 User Manual

9

 

This section provides procedures for testing 

and replacing various major components used in this 

dispenser should service become necessary.  Refer 

to Troubleshooting for assistance in determining the 

cause of any problem.
WARNING - Inspection, testing, and repair of electri-

cal equipment should be performed only by qualified 

service personnel.  The dispenser should be unplugged 

when servicing, except when electrical tests are re-

quired and the test procedure specifically states to 

plug in the dispenser.
COMPONENT ACCESS
WARNING - Disconnect the dispenser  from the power 

source before the removal of any panel or the replace-

ment of any component.

  All components are accessible by removing the 

eight #8-32 screws (five on the front and three on the 

rear) securing the main housing to the main mounting 

panel and the removal of the four #8-32 nuts secur-

ing the pump/solenoid switch panel to the solenoid 

mounting bracket. Refer to Fig. 1

FIG. 1  COMPONENT ACCESS

P1521

41093 040408