Delkin Devices 15 User Manual

Page 2                                                                                

Driver installation is not necessary for the  MacOS 9.0.4, 9.1and X operating systems.
When the Reader-15 is connected to the USB port, the computer will automatically
detect it and configure the correct drivers.  With a card inserted, the reader can be
accessed through the disk icon that will appear on the desktop.  For these operating
systems, the Reader-15 will use the MSD (Mass Storage Device) specification.

Before connecting the Reader-15, you must install the device drivers located on the
accompanying CD-ROM. To avoid compatibility issues, install only the Reader-15 driver.
Slot (front) loading CD-ROMs may not function correctly with a 3” CD disk. For these
systems it is recommended that you download the driver from  www.delkin.com

Prior to any software installation always
ensure you have backed up your hard drive
and prepared a recovery disk.

4.

Verify that your product matches
the one pictured on the screen.

5.

Click the button labeled Click Here
to Begin Installation and follow the
on-screen instructions.  For best
results, allow the drivers to be
installed into  the default locations.

6.

When the Setup Complete screen

appears, click the Finish button.

7.

Connect the Reader-15  to the USB

port or hub.

8.

You may now insert a MultiMedia

Card and access it like other drives
by clicking the Removable Disk
drive icon in My Computer.

Insert the USB plug of the Reader-15 into the USB port of your computer or hub.   See
inside front cover for illustration.

1.    Insert the Driver CD-ROM, then double-

click on the CD icon when it appears.

2.

Select eFilm Reader-15 from the product
list. (See Figure 2)

3.    Click the button labeled Install and follow

the on-screen instructions. Select Restart
Computer after installation is complete.