LG DX630 Owner's Manual

Function

1. Press the COLOR ADJ button on the remote control.

2. The success message appears as shown above. Then, execute the Automatic Color Adjustment

function to see the window below.

3. Press the

button to move between items.

4. Press the

OK button to select the condition you want.

●

You can use this function through the MENU button.

●

Press the EXIT button to exit the menu screen.

* What is Automatic Color Adjustment?

This function adjusts the white balance automatically when it is not properly adjusted because the projector
screen is affected by surrounding light or screen color.

-. Automatic Color Adjustment Modes:

a. Brightness mode : Adjust brightness first when using the Automatic Color Adjustment function.
b. Color mode : Adjust color first when using the Automatic Color Adjustment function.
c. Color ADJ of : Return to the previous screen.
d. Color ADJ retry : Execute the Automatic Color Adjustment function again.

-. Note: This function may not work properly when surrounding light is too bright, or screen color is too dark.

When this happens, refer to the warning message on the screen.

Color ADJ Function

Color correction is

sucess.

Brightness mode

Color mode

Color ADJ off

Color ADJ retry

Press OK Key

Exit Move OK