Altec Lansing BackBeat 906 User Manual
4
Charging Your Headphones or Bluetooth Adaptor
1
Plug the AC charger into a power outlet.
2
Connect the charger cable to the
headphones or Bluetooth adaptor.
headphones or Bluetooth adaptor.
3
Charge each for at least 1 hour before first
time use, or 3 hours to fully charge.
The LED indicator glows red while charging.
When fully charged, LED will turn blue until
unplugged. Do not use your headphones or
Bluetooth adaptor while they are connected to
the charger.
time use, or 3 hours to fully charge.
The LED indicator glows red while charging.
When fully charged, LED will turn blue until
unplugged. Do not use your headphones or
Bluetooth adaptor while they are connected to
the charger.
NOTE
Never charge the battery where the
temperature may fall below 0°C (32°F) or rise above
40°C (104°F)—for example, in an unattended motor
vehicle.
40°C (104°F)—for example, in an unattended motor
vehicle.
1
2
2
CHARgIng TIMe
3 hours ...................
Full charge
1 hour .....................
Minimum charge
before first use
[BackBeat 906 shown]