Aluratek AIRMM01F User Manual

11

There are three modes of network configuration for AIRMM01F. It can be a 

wireless client, a wired client, or even a wireless access point (Wireless AP).

The factory default mode is the wireless client code. According to the availability 

of an Ethernet cable, the device will automatically select a suitable client mode 

to operate. User can also manually change the setting of network configuration 

through the Setup menu “Setup/Advanced Setup/Configure Network”.

AIRMM01F will connect wirelessly if it detects an 802.11b/g wireless net-

work. With no Ethernet cable attached, you just need to power on the device 

and AIRMM01F will automatically enter the wireless client mode. 

To connect AIRMM01F to the wireless network for the first time, you will 

need to set the encryption key for a secured network. Once the setting is fin-

ished, the device will remember the related settings and try to connect to the 

designated AP when it is power on next time. However, if there is something 

trouble in connecting to the designated AP, the device will show the AP list 

screen for you to configure again

Scanning for 

available APs.

Device is running 

as a Wireless 

Client.