Skylink SW-318 Leaflet

To activate the receiver, simply press the appropriate button on the
transmitter, it will activate the plugged in device. Pressing it again will turn
off the plugged in device.

If, within one year from date of purchase, this product should become defective
(except battery), due to faulty workmanship or materials, it will be repaired or
replaced, without charge. Proof of purchase and a Return Authorization are required.

There are 2 buttons on your transmitter, the other
button can be used to control another Skylink

®

 

Garage

D o o r   R e c e i v e r   M o d e l   3 1 8 R   ( s o l d   s e p a r a t e l y )   o r   S k y l i n k

®

Wireless Switch Receiver Model SW-318R (sold
separately).

You can add as many additional transmitters as you want
to control the same receiver.  Simply set the same
operation code on all transmitters with the same code setting
on the receiver.  Skylink

®

  offers Keychain Transmitter

Model 318TN to work with your receiver. For more
information, please visit our website at
www.skylinkhome.com or contact us.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.

WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

RISK OF ELECTRICAL SHOCK. FOR INDOOR USE ONLY.
CAUTION : NOT FOR USE WITH DIMMER.

DISCONNECT POWER BEFORE CODE SETTING.
REPLACE COVER  AFTER CODE CHANGING.

Maximum Rating :
Input : 120VAC 60Hz
Resistive : 8A (960W)
Incandescent : 300 watts
Motor Load : 1/3 HP

17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3
Email:support@skylinkhome.com
http://www.skylinkhome.com

P/N. 101A208-003  Rev.3
US Patent. D380895
©2005 SKYLINK GROUP

If you would like to order Skylink’s products or have difficulty getting them  to work,
please :
1. visit our FAQ section at  www.skylinkhome.com , or
2. email us at support@skylinkhome.com , or
3. call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm
EST.  Fax  (800) 286-1320

12 volt alkaline battery (size 23A)
(included).
It is time to change the battery
when the red LED on the
transmitter does not turn on when
either button is pressed.