Olivetti 145D User Manual

7 3

1. Lower the handset and place it

on a stable surface.

2. Open and lift the operator con-

sole as indicated by the arrows.

3. Move the print cartridge carriage

to the left-hand edge of the fax
machine.

4. Release the paper feed roller by

pressing the lever, as indicated
by the arrow.

5. Remove the roller from its com-

partment.

6. Clean the glass surface of the

optical reader  with a 

with a product de-

signed specifically for cleaning
glass and then dry it thoroughly.

7. Place one end of the roller on

the pin situated on the left-hand
side of the fax machine, as indi-
cated by the arrow.

8. Engage the roller by pressing

the lever, as indicated by the
arrow.

3. Release the print cartridge by

pressing the lever as indicated
by the arrow.

4. Take the print cartridge out of its

compartment.

5. Clean the electrical contacts us-

ing a slightly damp cloth.

6. Clean the electrical contacts of

the print cartridge carriage with
a slightly damp cloth.

7. Insert the print cartridge in its compartment with the electrical

contacts facing towards the print cartridge compartment.

8. Push the print cartridge until it clicks into place.
9. Close the operator console and put the handset back on its

support.

Dust accumulating on the glass surface of the optical reader
may cause problems in the scanning of documents. To avoid
these problems, the glass should be cleaned every now and
again as follows:
With the fax machine 

:

9. Close the operator console and put the handset back on its

support.