Oreck JP777 User Manual

When using an electrical appliance, basic precautions

should always be followed, including the following:

• Use the Travel Iron/Steamer only for its intended use.
• This appliance is provided with a voltage selector, it can be used on 

120 V/230 V main power. This appliance will be set at the factory at 120 volts. 
Be sure dual voltage selector is in correct position before operating (refer to the 
General Information Section).

• To protect against a risk of electric shock, do not immerse the iron in water or   

other liquids.

• The iron should always be turned OFF before plugging or unplugging from   

outlet. Never pull cord to disconnect from outlet; instead, grasp plug and pull  
to disconnect.

• Do not allow cord to touch hot surfaces. Let iron cool completely before      

storing. Loop cord loosely around iron when storing.

• Always disconnect appliance from electrical outlet when filling with water or 

emptying and when not in use.

• To reduce the risk of contact with hot water emitting from steam 

vents, test the steamer before each use by holding it away from the body
and pressing the steam button.

• Close supervision is necessary for any appliance being used by or near       

children. Do not leave appliance unattended while plugged in.

• To avoid a circuit overload, do not operate another high wattage appliance on 

the same circuit.

• Do not operate Travel Iron/Steamer with a damaged cord or if the appliance 

has been dropped or damaged. To avoid the risk of electric shock,                
do not disassemble. All repair work should be done by an authorized          
Oreck Service Center.

• This appliance has a polarized plug (one blade is wider than the other). As a 

safety feature, this plug will fit in a polarized outlet only one way. If the plug 
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a 
qualified electrician. Do not attempt to defeat this safety feature.

• Do not use attachments not intended or recommended for this appliance.
• Burns can occur from touching hot metal parts, hot water, or steam. Use    

caution when you turn a steam iron upside down – there may be hot water in 
the water tank.

• Before removing or attaching any accessories, unplug the appliance from the 

electrical outlet and let it cool.

• Never iron or steam clothes while they are being worn.