Telefunken T37KWM875 FHD User Manual

Page of 71
English   - 49 -
If an active antenna is connected to your TV, you 
can select this option as On. Antenna power should 
be “Off” when standard antenna is used instead of 
the active antenna. See Confi guration Menu in the 
following sections for more information. 
Press OK button on the remote control to continue 
and the following message will be displayed on the 
screen:
   
 • To select the “Yes” or “No” option, highlight the 
item by using “ ” or “ ” buttons and press the OK 
button. 
 The IDTV will automatically tune to the UHF or VHF 
(** for EU countries) transmission channels, searching 
for digital terrestrial TV broadcasts and displaying the 
names of channels found. This process will take about 
a few minutes. To cancel searching, you can press the 
M” button at any time during the process.
   
 After Automatic Search is completed, the following 
message asking for analogue channel search appears 
on the screen: 
 
 
 To search for analogue channels, select “Yes”.  TV 
switches to the analogue TV mode. The menu below 
is displayed to search for analogue channels: 
 
 
 Select your Country, Language and Text language 
by using “ ” or “ ” and “
” or “
” buttons. Press 
OK or RED button to continue. To cancel, press the 
BLUE button.
For more information on this process, see “Install 
Menu” section. 
  Note : For proper functioning of digital teletext in DTV 
mode, you should set country as UK in analogue 
AUTO PROGRAM (for UK only).  
 General Operation
  Pressing the “TV/DTV” button at any time while 
watching television programmes will switch the TV set 
between the digital terrestrial television broadcasting 
and its normal analogue broadcasting. 
 Information Banner 
 • Whenever you change channel, using the P- / P+ 
button or the numeric buttons, the TV displays the 
broadcast picture along with an information banner 
at the bottom of the screen (available only in DTV 
mode). This will remain on the screen for a few 
seconds.  
 • The information banner can also be displayed at any 
time while watching TV by pressing the INFO button 
on the remote control: 
 
 
 Hint: Not all channels broadcast the programme 
data. If the name and time of the programme are not 
available, then information banner will be displayed 
with blanks. 
 If the selected channel is locked, you must enter the 
correct four numeric code to view the channel. “ Enter 
PIN
 ” will be displayed on the screen in such a case: 
 
 
 Electronic Programme Guide 
(EPG)
  • Some, but not all, channels send information about 
the current and next events. 
• Please note that event information is updated 
automatically. If there is no event information data 
available in channels, EPG will be displayed with 
blanks.
02_[GB]_MB35_37875W_1810UK_PEUIDTV_BRONZE2_10067040_50162177.indd   49
27.01.2010   09:03:13