TP-LINK TL-PA4010KIT User Guide
TL-PA4010
AV500 Nano Powerline Adapter
5
Off
The adapter isn’t connected to any powerline network or
is in power-saving mode.
is in power-saving mode.
On
The Ethernet port is connected, but there is no data
being transferred.
being transferred.
Blinking The Ethernet port is transferring data.
Ethernet LED
Off
The Ethernet port isn’t connected.
Note:
5 minutes after the device connected to the adapter is turned off, and the adapter will automatically
switch to the power-saving Mode.
switch to the power-saving Mode.
2.3 Physical Interface
There are three physical interfaces on this Powerline Adapter.
Pair Button
Power Plug
Ethernet Port
Interface
Description
Ethernet Port
A 10/100Mbps Ethernet port for connecting the adapter to the PC or the
broadband device with a network cable.
broadband device with a network cable.
Power Plug*
A Power Plug for connecting the adapter to a 100V ~ 240V AC power
socket.
socket.
Pair Button
Pair buttons are used to secure a powerline network. To secure your
network, please follow the steps below. Firstly, plug in a new adapter, and
press its pair button for 1 second; then plug in another adapter and press its
pair button for 1 second as well. The two buttons should be pressed within 2
minutes of each other. After that, wait about 60 seconds so that the two
adapters can finish connecting.
network, please follow the steps below. Firstly, plug in a new adapter, and
press its pair button for 1 second; then plug in another adapter and press its
pair button for 1 second as well. The two buttons should be pressed within 2
minutes of each other. After that, wait about 60 seconds so that the two
adapters can finish connecting.
*
The provided power plug may differ from the picture due to different regional power specifications.
Here we take the EU version of this product as an example.
Note:
1. If you press the Pair button for more than 10 seconds, the Powerline Adapter will leave the network