Rhinotek Work Light RHO-9015 Leaflet

Page of 2
 
RHO-9015 
RECHARGEABLE 15 MILLION CANDLE POWER HALOGEN 
SPOTLIGHT 
 
OPERATION 
-Charge the battery prior to initial use. (See Charging Instructions) 
-Turn the unit ON and OFF using the switch on the main body. 
 
CHARGING INSTRUCTIONS 
AC/DC Charger 
-Description: AC-DC Adaptor Charger. 
Input: AC 110~120V 60Hz, Output: 12VDC 500mA 
-Insert the charger plug into the DC jack of the unit and plug the charger into any 
110-120VAC supply. Charge the unit for 20 hours before the first use. For subsequent 
charges, allow approximately For subsequent charges, allow approximately 14-18 hours. 
12V DC CAR Plug Charger 
Plug the car plug adaptor supplied into the cigarette lighter socket on your car (truck or 
boat), and insert the adaptor plug into the DC jack of the unit. The time required to fully 
charge the battery from the 12VDC power supply is around 20 hours. 
IMPORTANT NOTE   
-Only use the charger supplied by the manufacturer. Other chargers may damage the unit 
and will void the warranty. 
-It is not recommended to use the unit continuously. It is designed for intermittent use only. 
-Do not overcharge the battery. The battery service life will be shortened. 
-Charge the battery immediately after each use. Do not store the discharged battery for 
long periods, as this will also shorten its service life. 
CAUTION 
-Do not touch the lens during operation. It will be extremely hot. 
-Do not cover the lens and reflector during operation. 
-Do not point the spotlight directly into the eyes. 
-When the Spotlight is ON, do not point the lens downward or toward surface anytime. It 
will burn most surfaces.