Sanus Systems ELM202 Leaflet

Page of 2
Sanus Systems  
2221 Hwy 36 West
Saint Paul, MN  55113  USA
Customer Service
800-359-5520 • 651-484-7988 • info@sanus.com
sanus.com
©2010 Milestone AV Technologies, a Duchossois Group Company. 
All rights reserved. Sanus is a division of Milestone. 
All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.
ELM202 Surge Protector
(6901-100200 <02>)
Specifi cations
 
2100 Joule surge suppression
 
EMI/RFI noise fi ltration
 
Gold-plated coaxial input and outputs 
 
UL Listed 
 
UL Electrical Rating: 15A Max/125Vac/60Hz/1875W 
 
Voltage Protection Rating: 400V(L-N)  500V(L-G)  400V(N-G)
Warranty
Your Sanus ELM202 Surge protector has a fi ve year product warranty 
against manufacturer’s defects.  If you have any questions or experience 
any problems with your Sanus Elements Surge Protector, please contact 
Sanus Systems Customer Service at 1-800-359-5520.
Both the “Ground” and “Surge” lights illuminate to 
indicate  that the surge protector is working.  If 
either light fails to illuminate, replace the surge 
protector.
From wall phone outlet
To phone / fax modem
From wall, DSS, cable, or other coaxial output
To TV, VCR, or other coaxial input
GROUND
SURGE
OUT
IN
OUT
IN
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT
 CAUTION: 
Avoid potential personal injury or property damage!
 
Do not disassemble the surge protector. Disassembling will void the 
warranty and may cause serious personal injury.
 
Disconnect the surge protector during lightning storms.
 
To Reduce the Risk of Electric Shock - Use Only in Dry Locations Indoors!
 
Risk of Electrical Shock. Do not plug into another relocatable power tap.
 
This device features an internal protection that will disconnect the surge 
protective component at the end of its useful life but will maintain power 
to the load - now unprotected.  If this situation is undesirable for the 
application, follow the manufacturer’s instructions for replacing the device.
 
Do not install this device if there is not at least 10 meters (30 feet) or more 
of wire between the electrical outlet and the electrical service panel.
 
The input plug of this power tap is intended to serve as the disconnect 
device, it shall be easily accessible and withdrawn.
 
Do not use this product for any purpose not explicitly specifi ed by Sanus 
Systems. 
 
If you do not understand these instructions, or have doubts about the 
safety of the installation, assembly or use of this product, contact Sanus 
Systems Customer Service or call a qualifi ed contractor.  
 
Sanus Systems is not responsible for damage or injury caused by incorrect 
assembly or use.