Siemens GIGASET SX205 User Manual

Page of 52
4
Getting started
Gigaset SX205-255i / englisch / A31008-X255-B100-1-7619 / operation.fm / 09.10.2003
Getting started
Pack contents
1 base
1 power supply cord with power unit
1 ISDN connection cable
1 USB cable
1 wall holder
Operating instructions
Notes on installation
The installation location must have a 220/230V~ mains outlet and an ISDN tele-
phone connection.
For optimum radio reception, you should install the base at a central point wherever 
possible.
The installation location should not be in the immediate vicinity of other equipment, 
e. g. hi-fi, television, office or microwave equipment, in order to prevent mutual 
interference. Minimum distance (including to base power unit): 1.5 metres. 
In case of picture and sound interference on satellite reception equipment, please 
contact your retailer to have your satellite reception system checked for a lack of 
screening.
Avoid direct contact with sources of heat (e .g. radiators).
Do not expose the base to direct sunlight.
The base can also be wall mounted, using the wall holder included in the pack.
If you are not using wall mounting, install the base on a level, non-slip surface. The 
feet of the device do not normally leave any marks on the installation surface. How-
ever, in view of the variety of paints and polishes available, it cannot be ruled out, 
that contact may cause marks on the installation surface.
The range between the base and the handsets is up to 300 m in the open air. Inside 
buildings, ranges of up to 50 m can be achieved.
Use as desktop unit
Your telephone can be used as a space-saving desktop unit. Before connecting the base, 
please read the notes on installation (page 3, page 4).