Spectra Hello Kitty KT5211 User Manual

Page of 5
 
- 1 - 
IMPORTANT SAFEGUARDS 
When  using  electrical  appliance,  basic  safety  precautions  should  ALWAYS  be 
followed including the following: 
 
1.  Read all instructions. 
2.  Do not touch hot surfaces. Use handles or knobs. 
3.  To protect against electrical shock, do not immerse cord, plugs, or Toaster in 
water or other liquids. 
4.  Close supervision is necessary when any appliance is used by or near children. 
5.  Unplug Toaster from outlet when not in use and before cleaning. 
Allow to cool before putting on or taking off parts. 
6.  Do  not  operate  any  appliance  with  a  damaged  cord  or  plug,  or  after  the 
appliance malfunctions or has been damaged in any manner. 
Return  appliance  to  the  nearest  authorized  service  facility  for  examination, 
repair, or adjustment. 
7.  The  use  of  accessory  attachments  not  recommended  by  the  appliance 
manufacturer may cause injuries. 
8.  Do not use outdoors. 
9.  Do not let cord hang over edge of table or counter, or touch hot surfaces. 
10.  Do not place on or near a hot gas or electric burner, or in a heated oven. 
11.  To disconnect, turn any control to 
“Off”, then remove plug from outlet. 
12.  Do not use appliance for other than intended use. 
13.  Oversize foods, metal foil packages, or utensils must not be inserted in Toaster 
as they may involve a risk of fire or electric shock. 
14.  A fire may occur if Toaster is covered or touching flammable material, including 
curtains, draperies, walls and the like, when in operation. 
15.  Do not attempt to dislodge food when Toaster is plugged in. 
 
SAVE THESE INSTRUCTIONS 
 
HOUSEHOLD USE ONLY 
 
 
Note on Cord Plug 
This  appliance  has  a  polarized  plug  (one 
blade is  wider than the other). To reduce the 
risk of injury this plug can only be inserted into 
a  polarized  outlet  only  one  way.  If  the  plug 
does  not  fit  fully  into  the  outlet,  reverse  the 
plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify 
the plug in any way.